Reliable PCB Supplier - Custom Solutions, Global Reach

This is a great soldering and PCB working platform for the price. Pros: * The thick, sturdy base ensures that it stays put when adjusting the arms or PCB standoffs. * The magnetic bases on the arms offer maximum versatility while working on your soldering projects. * The PCB standoffs effectively prevent a board from wobbling while soldering components to it. These arms articulate smoothly and accurately; there is no "clicking" in or out of where you need them, unlike flexible plastic arms. * Replaceable/removable clips are fantastic. There is plenty of space for smaller projects on the 7" by 11" area. Cons: * It requires a lot of space to store due to the huge base. The surface of the base scratches a bit more easily than I would like, so be careful not to pull the standoffs and arms too much. The plastic arms in this kit may be swapped out with the ones from the Adam Savage YouTube video, which shows how to build a portable soldering station. A steel plate is fastened to the base to hold the new arms in place. My actions were on my

TL;DR: Purchase this bundle. Excellent bargain. Functions flawlessly. My pair of helpful hands has two small scratches when I purchased them from the Amazon warehouse. They're expected, they don't interfere with anything, and someone was kind enough to fill them in with a black pen that matches. When the arms are in motion, they remain in that position because the base remains stable. The clips work well and are superior to most of the ones I've seen. It's nit-picky, but more accurate tips and plasti-dipped alligator clips instead of sleeved ones would be good. Some Anki Overdrive cars have already had their lipo batteries replaced with this set, and it works perfectly. The cherry on top of this cake are the little pillars. Six of them are incredibly stable (the magnets don't move), and once I cleaned them out (three of the brass tops required to be removed with a wrench and lubricated in order to slide smoothly), they are the greatest component of the set. They keep the board rock from moving. When I've made mistakes with electrical repair work, it's because I've tried to do things that need more hands than I have. That is.

Overclocking is arguably the primary feature of Z series boards, and those days are long gone when overclocking offered meaningful advantages. If you look at the B series, you can have most of the same features without having to pay the premium for the Z series, and all you're losing out on are a few extra M.2 slots and some extra power handling that is ineffective for CPUs other than K. Two standard M.2 connectors are included with the B660M Mortar, which is an ample amount. Oh, and by the way, you can overclock the RAM even though you can't overclock the CPU. To be fair, though, that can be a tricky procedure. But, may I say, welcome to the world of overclocking? The important thing to remember is that you can achieve this, and the benefits can be significant if your use case calls for a lot of quick data shifting to and from RAM. How about it? It's an excellent design for a B series board. A robust VRM guarantees that your CPU will always have access to lots of clean power, and large heat sinks across the board assist in removing heat from your expensive components.